Ozone Tube Generator for Commercial Disinfection / KYOG220V15G / 15g/h 55W 3.5kV

$22.21 USD

~~$23.62 USD~~ $22.21 USD

Sale Sold out

Shipping calculated at checkout.

Input voltage Standard version Custom OEM/ODM Solution

15 g/h

High Ozone Output Yield

55 W ± 5 W

Low Power Consumption

3.1–3.5 kV

16 kHz Resonant Drive

5 Quartz Tubes

Staggered Corona Array

Engineered for Commercial Sanitation, Odor Degradation & HVAC Disinfection

High-demand commercial appliances and HVAC ducts require reliable, continuous ozone generation without the rapid electrode oxidation and ceramic plate cracking typical of low-grade generators. The KINYO KYOG220V15G combines a durable 5-tube quartz dielectric corona discharge assembly with an efficient high-frequency resonant power pack, delivering steady 15 g/h ozone production. Built for commercial dishwashers, clothes dryers, HVAC duct air sanitization, cold storage preservation, and electronic shoe cabinets, it features full open-circuit and short-circuit protection and 3 kV electrical isolation.

Performance & Verification

Parameter	Result / Rating	Verification / Notes
Ozone Generation Output Yield	15 g/h (with dry ambient air or pure oxygen feed)	Internal Laboratory Test
Microbial Sterilization Efficacy	≥ 99.0% airborne bacterial reduction	(Pending Confirmation)
High-Voltage Drive Output	3.1 kV – 3.5 kV AC at ~16 kHz resonant frequency	Internal Laboratory Test
Power Factor & Electrical Efficiency	Power factor ≥ 0.95 (Rated 55 W ± 5 W, input current ≤ 380 mA)	Internal Laboratory Test
Dielectric Insulation Withstand	3 kV isolation between primary and secondary circuits	Internal Laboratory Test

Note: Performance results were obtained under controlled laboratory conditions. Actual performance may vary depending on test conditions, airflow, pollutant concentration and installation environment. Test reports are available upon request.

Engineering Highlights

01. 5-Tube Staggered Quartz Corona Matrix

Five quartz dielectric tubes with outer stainless steel mesh sleeves arranged in a staggered configuration ensure uniform corona discharge and enhanced airflow contact.

02. Precision High-Frequency Resonant Driver

Custom resonant power supply operates at ~16 kHz with high power factor (≥ 0.95), optimizing electrical-to-ozone conversion efficiency while keeping component thermal rise minimal.

03. Comprehensive Electrical Circuit Protection

Engineered with 3 kV primary-to-secondary electrical safety isolation, complemented by automatic open-circuit and short-circuit protection circuits to protect upstream appliance controllers.

04. Flexible Feed Gas & Cooling Support

Compatible with dry ambient air or pure concentrated oxygen feed gas, utilizing standard forced-air convection cooling through its base aluminum heat sink for extended continuous duty.

Technical Data & Specifications

Product Model	KYOG220V15G
Product Category	Corona Discharge Ozone Tube Generator Module
Ozone Generation Method	High-Frequency Dielectric Barrier Discharge (DBD) Quartz Tubes
Rated Ozone Output Yield	15 g/h (0.1–20 g/h scalable range upon request)
Operating Input Voltage	AC 220 V, 50/60 Hz
Rated Power Consumption	55 W ± 5 W (60 W Max)
Input Operating Current	≤ 380 mA
Output High Voltage	3.5 kV ± 5% (3.1 kV – 3.5 kV AC, 3500 V ± 500 V)
Operating Frequency	~16 kHz Resonant Frequency
Power Factor	≥ 0.95
Discharge Gap	3 – 5 mm
Tube Assembly Configuration	5-Tube Quartz Mesh Array (Staggered Dual-Tier Matrix)
Dimensions	Power Supply: 145 × 55 × 40 mm; Ozone Tube Unit: 200 × 45 mm
Operating Mode	Intermittent continuous pulse discharge, continuous tube operation
Safety & Protection	3 kV primary-secondary isolation; open-circuit and short-circuit protection
Feed Gas & Cooling	Dry air or pure oxygen feed; ambient air cooling (forced-air fan recommended)
Applicable Standards	Designed to comply with CE and industrial ozone equipment safety directives

Applications

Commercial Dishwashers Commercial Clothes Dryers Refrigerator & Cold Storage Deodorization Electronic Shoe Cabinets HVAC Duct Air Sterilization Industrial Water Treatment & Ozonation Agricultural & Greenhouse Sanitation OEM Air Purifier Manufacturing

Custom OEM/ODM Engineering & Multi-Voltage Integration

Shenzhen KINYO Technology Co., Ltd. provides comprehensive OEM/ODM engineering support for global commercial appliance and environmental equipment manufacturers. We support customized ozone yield specifications ranging from 0.1 g/h to 20 g/h, multi-voltage power inputs (110VAC, 220VAC, or 12VDC), bespoke structural mounting frames, and matched microcontroller timing boards. Contact our engineering team for sample evaluations and technical datasheets.

View full details