1
/
of
2
Thermal Anemometer Airflow Sensor for HVAC Ducts / KY0012B / 0-20m/s & RS-485 Output
Thermal Anemometer Airflow Sensor for HVAC Ducts / KY0012B / 0-20m/s & RS-485 Output
Regular price
$999.00 USD
Regular price
Sale price
$999.00 USD
Shipping calculated at checkout.
Quantity
Couldn't load pickup availability
Share
0~20 m/s
Velocity Range
0.1 m/s
Resolution
12VDC
Power Input
RS-485
Modbus / Analog
Industrial HVAC Thermal Anemometer Airflow Sensor: Model KY0012B is engineered for high-precision air velocity monitoring and volumetric energy calculations across central HVAC ventilation ducts, variable air volume (VAV) systems, and air handling units (AHU). Incorporating a high-performance thermal wind speed sensing element imported from Germany, it delivers real-time velocity measurement up to 20 m/s with 0.1 m/s resolution, integrated temperature compensation, and stable RS-485 Modbus or analog signal transmission.
Performance & Verification
| Parameter | Result / Accuracy | Notes |
|---|---|---|
| Air Velocity Measuring Range | 0.0 ~ 20.0 m/s | Factory Calibrated |
| Measurement Resolution | 0.1 m/s | Pending Confirmation (Awaiting Lab Report) |
| Operating Voltage | 12.0 VDC (±10%) | Reverse Polarity Protected (Pending Confirmation) |
| Output Signal Protocols | RS-485 / 0~5VDC / 4~20mA | Multi-Protocol Selectable (Pending Confirmation) |
| Thermal Drift Compensation | Integrated Temperature Circuit | -10℃ ~ 50℃ Range (Pending Confirmation) |
Note: Performance results were obtained under controlled laboratory conditions. Actual performance may vary depending on test conditions, airflow turbulence, duct geometry, and installation environment. Test reports are available upon request.
Engineering Highlights
01. German-Imported Thermal Core
Utilizes a high-precision thermal anemometry sensing chip engineered in Germany, delivering sensitive low-speed response and zero mechanical wear.
02. Active Temperature Compensation
Built-in internal calibration algorithm compensates for ambient duct temperature shifts between -10°C and 50°C to maintain consistent measurement accuracy.
03. Versatile Building Automation Signals
Supports digital RS-485 Modbus networking for centralized BMS building control, along with standard 0~5V DC and 4~20mA industrial analog outputs.
04. Flange Duct Insertion Design
Rugged stainless steel probe shaft with integrated aerodynamic sampling window and mounting flange for rapid in-duct retrofits and cleanroom ventilation lines.
Technical Data & Specifications
| Model Number | KY0012B |
| Product Category | Thermal Anemometer Airflow Sensor / Transmitter |
| Measuring Principle | Thermal Mass Anemometry |
| Velocity Measuring Range | 0.0 ~ 20.0 m/s |
| Accuracy / Resolution | 0.1 m/s |
| Supply Voltage | 12VDC (Nominal) |
| Signal Output | RS-485 (Modbus-RTU) / 0~5VDC / 4~20mA |
| Operating Conditions | -10℃ ~ 50℃, <95% RH (Non-condensing) |
| Temperature Compensation | Fully Integrated Automatic Thermal Compensation |
| Probe Material & Housing | Stainless Steel Sensor Stem, ABS Industrial Transmitter Housing |
| Origin | Made in China |
Applications
Central HVAC Duct Airflow Monitoring
VAV Box Air Balancing & Control
Building Automation & Energy Metering
Cleanroom & Biosafety Hood Ventilation
AHU & FCU Wind Speed Transmitter
OEM / ODM Custom HVAC Sensors & Probes
Need customized duct airflow transmitters? KINYO-CHINA offers customized probe insertion lengths, higher velocity ranges (up to 30 or 40 m/s), customized RS-485 Modbus registers, analog calibration, and tailored harness pinouts for HVAC automation.
Inside Our Factory
Why Work With KINYO
20 Years of OEM/ODM Plasma ESP air purifier/Core parts/Intelligent control board products.