1
/
of
5
Oil Fume ESP Filter Cell for Commercial Kitchen / KY-ESP Series / 1500–3500 m³/h
Oil Fume ESP Filter Cell for Commercial Kitchen / KY-ESP Series / 1500–3500 m³/h
Regular price
$290.60 USD
Regular price
$499.00 USD
Sale price
$290.60 USD
Shipping calculated at checkout.
Quantity
Couldn't load pickup availability
Share
1,500–3,500 m³/h
Scalable Airflow Coverage
>99%
STERILIZATION RATE
>90%
VOC REMOVAL
100% Washable
Reusable filter
Engineered for Heavy Commercial Kitchen Exhaust & Industrial Oil Mist Purification
Commercial cooking hoods and industrial machining lines face extreme grease buildup, high operating airflow resistance, and recurring consumable filter replacement expenses. The KINYO KY-ESP Series electrostatic precipitator (ESP) collector cells utilize a rigid two-stage ionization and collection architecture to capture sub-micron cooking smoke, grease aerosols, and industrial mist with minimal aerodynamic drag. Built from aviation-grade aluminum plates and precision-spaced stainless steel hardware, each cell is 100% reusable and washable, delivering sustainable, low-maintenance air filtration for commercial kitchen exhaust systems, HVAC ducts, and industrial ventilation networks.
Performance & Verification
| Parameter | Result / Rating | Verification / Notes |
|---|---|---|
| Oil Fume & Cooking Smoke Collection Efficiency | ≥ 95% single pass (scalable to ≥ 98% in multi-pass arrays) | Internal Laboratory Test |
| Particulate Matter (PM2.5) Filtration | ≥ 99% | (Pending Confirmation) |
| Aerodynamic Initial Resistance (Air Drag) | < 25 Pa at rated face velocity | Internal Laboratory Test |
| High-Voltage Dielectric Insulation | Matched with dual-stage 4–16 kV DC power supplies | Internal Laboratory Test |
| Chemical & Cleaning Resistance | 100% washable; resistant to caustic soda / degreasing alkaline wash | Internal Laboratory Test |
Note: Performance results were obtained under controlled laboratory conditions. Actual performance may vary depending on test conditions, airflow, pollutant concentration and installation environment. Test reports are available upon request.
Engineering Highlights
01. Two-Stage Electrostatic Ionization
High-voltage ionizing zone charges incoming airborne aerosol droplets, while grounded parallel collector plates electrostatically attract and capture oil mist with minimal airflow restriction.
02. Heavy-Duty Aluminum Architecture
Constructed from corrosion-resistant aviation-grade aluminum plates with rigid corner brackets, ceramic standoff insulators, and stainless steel hardware for long-term structural integrity.
03. Comprehensive Standard Size Matrix
Eight standardized modular cell sizes covering 1,498 to 3,000 m³/h per cell allow engineers and contractors to combine multiple units seamlessly into large commercial kitchen hoods.
04. Matched Intelligent High-Voltage Packs
Fully compatible with KINYO KYOG Series 100W and 200W constant-voltage high-frequency power supplies featuring arc suppression, short-circuit protection, and status feedback.
Technical Data & Standard Model Matrix
| Model No. | Cell Dimensions (L*W*T mm) | Duct Flange Size (mm) | Rated Airflow (m³/h) | Cell Architecture |
|---|---|---|---|---|
| KY2Y600 | 460 × 600 × 300 | 345 × 480 | 2,385 | Two-Stage Modular Cell |
| KY2Y600T | 460 × 600 × 380 | 345 × 480 | 2,683 | Deep-Bed High-Capacity Cell |
| KY3Y455 | 470 × 455 × 350 | 355 × 335 | 1,498 | Compact Width Cell |
| KY4Y460 | 470 × 460 × 360 | 390 × 370 | 2,077 | Square Flange Cell |
| KY5Y500 | 460 × 500 × 260 | 345 × 380 | 1,650 | Slim Profile Cell |
| KY5Y600 | 460 × 600 × 260 | 345 × 480 | 2,086 | Slim Profile Cell |
| KY5Y700 | 460 × 700 × 260 | 345 × 580 | 2,520 | Extended Width Slim Cell |
| KY4Y800 | 460 × 800 × 260 | 345 × 680 | 3,000 | High-Airflow Wide Cell |
| Product Category | Commercial Oil Fume Electrostatic Precipitator (ESP) Cell |
| Filtration Technology | Two-Stage Electrostatic Precipitation (Ionization & Parallel Collector Plates) |
| Cell Material | Aviation-Grade Aluminum Alloy Plates, High-Dielectric Ceramic Insulators, Stainless Steel Hardware |
| Airflow Capacity | 1,498 – 3,000 m³/h per single cell (Modular scalable up to 3,500+ m³/h) |
| Airflow Resistance | Initial resistance < 25 Pa |
| Matched High-Voltage Drive | KYOG220V10 (100W, 4/8kV, 5/10kV DC) / KYOG220V20 (200W, 8/16kV DC) |
| Power Supply Input | 90V–250VAC, 50/60Hz universal input |
| Cleaning & Maintenance | 100% Washable & Reusable (Immersion soak in caustic soda / degreasing alkaline tank) |
| Mounting & Handling | Integrated slide-in track mounting with dual stainless steel pull handles |
| Operating Standards | Designed to comply with commercial kitchen exhaust and HVAC ventilation standards |
Applications
Restaurant Exhaust Hoods Commercial Kitchen Ventilation Hotel & Catering Facilities Food Processing & Baking Lines CNC Machine Tool Oil Mist Collection Industrial Welding Smoke Extraction HVAC Duct Electrostatic Filtration OEM Commercial Hood Manufacturing
Inside Our Factory
Why Work With KINYO
20 Years of OEM/ODM Plasma ESP air purifier/Core parts/Intelligent control board products.