• Top-down studio photograph of the sealed KYOG220V06 high-voltage power supply on a white background, showcasing the compact black flame-retardant housing, side mounting ears, yellow AC power input connector, black fault feedback wire, and heavy-duty silicone-insulated red and black high-voltage output cables.
  • KYOG220V06 5W high-voltage power supply module shown from an open top-down view on a white background, highlighting the potted internal components including dual toroidal inductors, high-voltage transformer, capacitors, yellow AC input harness with 2-pin connector, and red and black high-voltage output leads.
  • Complete commercial ESP filtration demonstration setup on a white background, featuring the KYOG220V06 high-voltage power supply wired via color-coded leads to an aluminum multi-plate electrostatic collector cell and an external step-down AC power transformer.
  • Technical marketing infographic banner for the KYOG220V06 high-voltage power supply, displaying the fully enclosed black housing with top screws, 0V/5V diagnostic interface, and feature callouts including dual 8kV/4kV DC output, 5W low power consumption, short-circuit and 2–5s arc protection, and patented double closed-loop control.
  • Overhead benchtop assembly photo with red engineering callout arrows illustrating the complete wiring integration between the high-voltage power supply, AC step-down transformer, intermediate connector board, 8kV and 4kV high-voltage rails, ground wire, and commercial ESP collector cell.
  • Official engineering catalog specification sheet for KINYO KYA0044 series high-voltage power supplies, featuring isometric and multi-view dimensional CAD mechanical drawings (88.9 × 76.3 × 30.6 mm, 80mm hole pitch), feature bullet points, and full electrical parameter tables.
  • Detailed engineering schematic titled Figure 2 KINYO Single-Output High Voltage Power Supply Wiring Diagram, illustrating AC transformer step-down power input, +5~7kVDC high-voltage output connections to an ESP cell, grounding, 0V/5V fault status alarm interface, and full wire color code legend.
1 8

High Voltage Power Supply for Commercial ESP / KYOG220V06 / 220VAC & Dual 8kV/4kV 5W

High Voltage Power Supply for Commercial ESP / KYOG220V06 / 220VAC & Dual 8kV/4kV 5W

$46.90 USD
$46.90 USD
Sale Sold out
Shipping calculated at checkout.
Input voltage
Max Rated Power 5 Watts Low Energy Consumption
Dual High-Voltage +8 kV / +4 kV Ionizer & Collector DC
Output Current 50 ~ 600 μA Trimmer Adjustable
Airflow Capacity < 1000 m³/h Commercial ESP Units

Commercial-Grade 5W Dual-Output High-Voltage Power Pack for Electrostatic Air Cleaners

The KYOG220V06 (KYA0044 series) high-voltage power supply delivers 5W of regulated dual high-voltage DC power (+8 kVDC for ionization and +4 kVDC for dust collection) designed for commercial electrostatic precipitator (ESP) units and HVAC air cleaning equipment handling up to 1000 m³/h. Featuring patented voltage and current double closed-loop control technology, it maintains stable particle capture efficiency while suppressing harmful ozone generation. Encapsulated in black flame-retardant epoxy resin inside an 89×76×30 mm compact housing, it features built-in output short-circuit, overload, and 2–5s continuous arc-pull protection with a 0V/5V remote diagnostic fault feedback signal.

Performance & Verification (P&V)

Parameter Result / Accuracy Notes
Dual High-Voltage Output Amplitude +8.0 kVDC / +4.0 kVDC (±5%) Internal Laboratory Test
Continuous Arc-Pull Protection 2.0 ~ 5.0 Seconds Cutoff Latency Internal Laboratory Test
Regulated Output Current 50 ~ 600 μA Continuous (Adjustable Trimmer) Internal Laboratory Test
Maximum Rated Power Consumption 5.0 Watts Full Ionization Load Internal Laboratory Test
Fault Status Signal Feedback Normal: 0 VDC / Fault: 5 VDC Internal Laboratory Test
Double Closed-Loop Control Stability Voltage & Current Closed-Loop Circuit Control Internal Laboratory Test
Continuous Operational Lifespan ≥ 30,000 Hours Continuous Industrial Duty Internal Laboratory Test
Safety & Regulatory Compliance Designed to meet CE & RoHS Directives Internal Laboratory Test

Note: Performance results were obtained under controlled laboratory conditions. Actual performance may vary depending on test conditions, airflow, pollutant concentration and installation environment. Test reports are available upon request.

01. Patented Double Closed-Loop Control

Continuous voltage and current monitoring stabilizes ionization efficiency under shifting temperature, humidity, and particle loads while keeping ozone concentration strictly suppressed.

02. Active Arc & Short-Circuit Safety

Intelligent protection circuit trips within 2–5 seconds during sustained dielectric flashovers or short-circuits, shutting off high voltage to protect ESP collector plates.

03. Remote Diagnostic Fault Output (0V/5V)

Low-voltage fault interface outputs 0VDC during normal operation and 5VDC upon fault trip, allowing building automation systems (BMS) or master controllers to monitor status in real time.

04. Compact Potted Industrial Housing

89×76×30 mm compact profile fully encapsulated with vacuum-degassed epoxy resin, insulating high-voltage electronics against moisture, dust accumulation, and airborne oil mists.

Technical Data & Specifications

Model Number KYOG220V06 (KYA0044 Series)
Product Category Commercial Dual-Output High-Voltage Power Supply for ESP Systems
Circuit Control Topology Voltage and Current Double Closed-Loop Control
Operating Input Voltage AC 180~250V 50/60Hz (via Step-Down Transformer; 18VAC / 24VDC Optional)
Dual High-Voltage DC Output +8 kVDC (Ionizer Stage) / +4 kVDC (Collector Stage) [Customizable]
Maximum Rated Power 5 Watts Maximum
Rated Output Current 50 ~ 600 μA Continuous (Trimmer Adjustable)
Applicable Airflow Capacity < 1000 m³/h (Commercial Air Cleaners & HVAC Ducts)
Diagnostic Fault Feedback Normal Operation: 0 VDC / Electrical Fault: 5 VDC
Safety Protections Output Short-Circuit, Overload, 2–5s Continuous Arc-Pull Protection
Encapsulation & Enclosure Flame-Retardant ABS Plastic Housing (Potted Black Epoxy Resin)
Physical Dimensions 89 mm (L) × 76 mm (W) × 30 mm (H) [CAD: 88.9 × 76.3 × 30.6 mm, Pitch: 80.0 mm]
Mounting Configuration Chassis Screw Mounting (Dual Integrated Side Mounting Tabs)
Wiring Harnesses Yellow AC Input with Socket, 0V/5V Signal Lead, Red (+8kV) & Black (+4kV) HV Terminals
Compliance Standards Designed to meet CE and RoHS standards

Recommended Applications & Equipment Integration

Commercial Electrostatic Precipitator (ESP) Purifiers HVAC Fan Coil Unit (FCU) In-Duct Electronic Filters Air Handling Unit (AHU) Electronic Air Cleaners Commercial Kitchen Range Hood Exhaust Purifiers Industrial Oil Mist Collectors & CNC Filtration OEM Electronic Air Cleaner Appliance Manufacturing

Custom OEM & ODM High-Voltage Manufacturing

Backed by 20+ years of high-voltage R&D and commercial manufacturing experience, KINYO offers extensive OEM/ODM customization for ESP power supplies. Custom options include tailored input voltages (12VDC, 24VDC, 18VAC, 110VAC, 220VAC, 277VAC), customized dual-output voltage ratios (e.g., 6kV/3kV, 10kV/5kV), adjustable current limits up to 1mA+, custom wiring harness lengths and terminal lugs, customized mounting flanges, private label branding, and customized fault detection thresholds.

Inquire About Custom OEM/ODM Solutions →
View full details

Inside Our Factory

Why Work With KINYO

20 Years of OEM/ODM Plasma ESP air purifier/Core parts/Intelligent control board products.

Know More